VholdR / Shoot

Overview

We told you a little bit about the TRailTM mounting system in the features section, but really, what's the point of bragging about some patented and trademarked mounting system if we don't even show you the mount itself?

The mount is where your video gets its point of view. And the sexy rails on VholdR's sides ensure every mount "slides and locks" into place. Line up the rails, slide into place, and wait for the click. VholdR is holding on. Now take us for a ride.

Flat Surface

This mount will no doubt become our flagship, as this style is the most flexible, and can be used on helmets, snowboard decks, skis, fuel tanks, windows, doors and of course anything you can rig up.

This little circle of sweetness carries a very small footprint, and attaches with an adhesive pad designed for outdoor use. Once the base is set on your surface, the center of the mount detaches as a tiny-toothed circle, which locks back in with double-toothed Velcro. You can turn the smaller circle 360 degrees to capture any angle you desire.

The Flat Surface Mount comes STANDARD with every VholdR Camera.

Vented Helmet

Does your helmet have a bunch of holes? C'mon, admit that you just have to have the breeze in your hair! If you do then you'll want to get yourself a vented helmet mount for your VholdR. The vented mount features an easy, but secure, strap system to get a clean profile without a bunch of duct tape. Adjustability comes from a 7 degree notch system that gives you the flexibility to mount, and then dial in your line of sight.

Coming soon

Goggle Strap

This flexible piece of rubber wraps around a standard goggle strap and rests comfortably against your head on soft pads. The mount features rubber grips to keep it from slipping, and is counterbalanced so VholdR won't pull the strap off your head. Adjustability comes from, well... You! This mount lets VholdR look right where you're looking, it will catch point-of-view video from your line of site, the first time, and every time.

Coming soon

Handle Bar

Do you have some sort of tube with a maximum diameter of 1-1/2" and a desire to mount your VholdR to it? Then slap on the handle bar mount. This mount opens up to wrap around your tubing, and then has an adjustable compression fit system to get a tight grip on the bar for clean, steady video. Adjustment: unlock, rotate, lock, and repeat.

Coming soon

Roll Bar

What if you want to attach VholdR to, say, a roll cage? Or what about the top of a windsurfing mast? Or a hang glider support? Then for anything up to 2-1/2" in diameter, you're covered with the Roll Bar mount, which fine tunes with an adjustment wheel for capturing video from even more unique angles.

Coming soon